ninjette.org - View Single Post - Fuel injected 08-11 ninja250r help

DannoXYZ · September 13th, 2021, 12:16 AM

Ninja 300 ignition-maps scaled from 0-100 kpa NA-mode only. That is, max-load row on 300 map should line up with 0psi on Ecotrons map. Then gradually decrease ignition as boost increases. At 5psi, you'll probably want 30-degrees max.

September 13th, 2021, 12:16 AM	#33
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Ninja 300 ignition-maps scaled from 0-100 kpa NA-mode only. That is, max-load row on 300 map should line up with 0psi on Ecotrons map. Then gradually decrease ignition as boost increases. At 5psi, you'll probably want 30-degrees max.