ninjette.org - View Single Post

alex.s · April 8th, 2014, 06:36 PM

if you don't have a lathe, stick it in a drill, tape the drill to the table in the on position, then use a metal file and your calipers to bring it down to the correct size. you can lock your chuck onto that end piece

April 8th, 2014, 06:36 PM	#54
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	if you don't have a lathe, stick it in a drill, tape the drill to the table in the on position, then use a metal file and your calipers to bring it down to the correct size. you can lock your chuck onto that end piece __________________________________________________