September 22nd, 2011, 06:26 AM
|
#9
|
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010
Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F
Posts: A lot.
|
Quote:
Originally Posted by k-os
You can make your own socket for the steering stem nuts. I made one that fits Hondas. I used a 36mm (I think) socket and grinded down the face of it so that it's flat (the chamfer on the open end is gone). After that I marked out 4 tabs that matched up with the steering stem nuts and cut away the socket around these. I had to have the socket cut in half and a piece of tubing welded in between so that it would clear the excess stem when torquing the nuts down.
|
Wow...
Can we get a picture of that???
__________________________________________________
09 250R SE: Paying it forward one post at a time!
Don't forget to add yourself to our Member Map
|
|
|