Clip on bars are essential to a land speed bike. They are mounted below the top fork clamp.
I removed the last two inches of the grips. And moved the grips in toward the center as far as I could.
On the clutch side I have a adjustable lever . I also use a first gen clutch cable. The second gen cable comes streight out. The first gen goes into a 90 degree bend. This helps clear the brake hose.
I also had to remove the ignition key
I removed the whole light switch pod and replace it with a starter kill switch from an R1. I mount it upside down and rewire it. Now it's a nitrous button and a switch to change ignition maps.
I limit the right and left movement of the fork . It's down to about 25 degrees .
The front brake lever on the right handlebar is hooked to the rear caliper. This makes it easy to mount the right footpeg. And I can use the hand break getting in and out of the van. That will be a nice addition I did not have before.
The break line is custom made by HEL. They are the best in te business.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
|