ninjette.org - View Single Post

thumper64 · March 13th, 2013, 09:36 PM

If I couldn't get the piece to fit on the splined shaft of the motor, I would either find a second one of those little brackets and weld it on, or grind the piece down square and make a new bracket. Or, maybe cut a keyway into the shaft and put a key in the bracket.

Another guy on this forum had a bike that had a rounded shaft and the shifter just would not grip it. He ended up just welding it.

March 13th, 2013, 09:36 PM	#2
thumper64 ninjette.org member Name: Tim Location: Quad Cities Join Date: Sep 2012 Motorcycle(s): Ninja 250 Posts: 102	If I couldn't get the piece to fit on the splined shaft of the motor, I would either find a second one of those little brackets and weld it on, or grind the piece down square and make a new bracket. Or, maybe cut a keyway into the shaft and put a key in the bracket. Another guy on this forum had a bike that had a rounded shaft and the shifter just would not grip it. He ended up just welding it. __________________________________________________ Motorcycle noob, feel free to ignore me.