Notes for 31th July:
After assembly the PCB v3.0 of MSII, i found it don't have the built-in ignition module
It is to late to place another order for this module, i decided to buy the prototype PCB and IC to do it by myself
==> Will update this item
==========
For other hardware setting:
1. Crank shaft signal input ==> As I understood the original sensor of my bike is a kind of VR sensor with 2 wires, so i will set up the MSII for VR sensor.
2. Ignition coil ==> Part number of DENSO 129700-5430, so with the ignition module i am going to set up with 2 BIP373 to control 2 ignition coils. But i will built the board have spare connections of 6 ignition coils if i reuse this MSII for other
3. Communication port of MSII is quite old model with RS-232 standard. I will change to bluetooth with breakboard BT
4. 2 CAN ports for other communication.