Quote:
Originally Posted by lordhelemt
I did not soda blast the carb but it is all cleaned out. Passages are all clear (even the tiny ones on the choke circuit).
I did notice 2 things after reading this thread. First I didn't realize there were 2 different needles, second the needle seal/collars were in the bottom of my ultrasonic tank (didn't realize these were not pressed in). Will order new rubber orings and get this back together with the collars and needles in the correct position.
|
On my “rebuilt” carb the needles were also the wrong gen. Probably worth double checking while you have the carb out. Good luck.