Quote:
Originally Posted by Alex
Pretty sure that's the rear brake light switch, that attaches to the rearset. Looking at old threads, some of them refer to it, but perhaps the best pictures aren't around anymore.
Here's a google result that seems to confirm it:
https://www.truegether.com/rear-brak...6/listing.html |
Ok thanks. I’ll take a closer look tomorrow. Kinda scared me when I heard that pop noise as if it was air pressure blowback from something.
Appreciate it.
Quote:
Originally Posted by DannoXYZ
Did you get brand-new official OEM spring from authorised Kawasaki dealer? It's actually two springs in one. Make sure spring ends are inserted into grooves on both sides. And you should have hard time stretching it about 1"-1.5". Sometimes spring hook tool is needed to install.
If you bought used spring off fleabay, it may be used and stretched. Make sure it's strong enough to keep kickstand locked in up position. Otherwise if it flops around, it'll trigger sidestand switch and turn off bike at most unopportune time.
|
Yes I bought it from Partszilla. Here’s what it looks like in the stand.
