ninjette.org - View Single Post - Seat cowl - installation and replacement rubber grommet

Guinss · July 28th, 2010, 03:53 AM

I have noticed that although the rubber grommet looks like it's similar on both sides, my rear cowl will stay perfectly good in place with the grommet the right way. If you turn it upside down it will fall through the frame when your put on the seat cowl, and if it does not fall off, it will within a few miles of driving.

I've put 2 safety velcro incase the cowl falls off, but 2k miles and so far it hasnt loosened at all. So no need for replacement grommet.

July 28th, 2010, 03:53 AM	#170
Guinss ninjette.org guru Name: Simen Location: Norway Join Date: Jan 2009 Motorcycle(s): 2008 250R (Black) Posts: 298	I have noticed that although the rubber grommet looks like it's similar on both sides, my rear cowl will stay perfectly good in place with the grommet the right way. If you turn it upside down it will fall through the frame when your put on the seat cowl, and if it does not fall off, it will within a few miles of driving. I've put 2 safety velcro incase the cowl falls off, but 2k miles and so far it hasnt loosened at all. So no need for replacement grommet.