ninjette.org - View Single Post

cbdallas · March 22nd, 2012, 10:27 AM

All you really need to do is screw the adjuster inward until you have 2-3mm of space between the lever and the base when you release the clutch. If you have that much freeplay in the lever and you still get slipping, you have a plate/fiber or spring issue.

Have you done an oil change? If you have, and used the wrong type of oil (energy conserving), this could be the issue.

March 22nd, 2012, 10:27 AM	#5
cbdallas ninjette.org guru Name: Charlie Location: Wylie, TX Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 317	All you really need to do is screw the adjuster inward until you have 2-3mm of space between the lever and the base when you release the clutch. If you have that much freeplay in the lever and you still get slipping, you have a plate/fiber or spring issue. Have you done an oil change? If you have, and used the wrong type of oil (energy conserving), this could be the issue.