ninjette.org - View Single Post - Seat cowl - installation and replacement rubber grommet

kkim · May 18th, 2009, 09:51 PM

use something like armorall on the cowl "pin" that slips into the rubber grommet. that way when you take off the cowl, it will slip easily out of the grommet instead of pulling it out from the frame.

May 18th, 2009, 09:51 PM	#122
kkim Join Date: Nov 2008 Posts: Too much.	use something like armorall on the cowl "pin" that slips into the rubber grommet. that way when you take off the cowl, it will slip easily out of the grommet instead of pulling it out from the frame.