November 11th, 2014, 08:52 PM
|
#7
|
|
ninjette.org newbie
Name: joey
Location: kansas city
Join Date: Nov 2014
Motorcycle(s): 09 ninja 250r 09 ninja 250r stunt 2011 ninja 250r
Posts: 7
|
hot red turbo do you have pictures on how you wired yours
Quote:
Originally Posted by HotRedTurbo
I wired my racebike to use a switch. The information is in the service manual electrical wiring diagram. Well, except the 100 ohm resistor part.
The resistor is in the ignition from the igniter side (gray) I believe. When turning on the ignition switch, it is positioned in series with a 12V source (2 White wires). You also need the regulator wire seeing a 12V source when on. If you want to do this mod, I would recommend getting a switch with an LED, just to make sure you have 12V when turned on. I did just incase something goes wrong at the track it'll help me troubleshoot faster (ie: bike is not turning on and LED is not turning on means there's no voltage. Battery/wiring issue). I'm working now but I'll try to go home and take pix during lunch, which is very soon.
PS: When in doubt, ohm it out. Cut all wires to ignition switch and start ohming out every combination of paired wires possible (with position ON of course). You'll find which 2 wires it is that way.
|
|
|
|