|
Should be OK. Check their fully-compressed height and verify they don't fully bind when squeezed. If they do, clutch won't release fully.
I'm using Barnett springs from different bike (R6 or R1 I think), that's longer in uncompressed state. But due to lower number of coils, they actually end up at lower height when fully compressed and coil-bound. I prefer this spring on my race bike due to stiffer-rate along with more binary on/off transition. Doesn't require as much lever-travel to disengage clutch, but there's no feathering clutch either. It's either all on or all off.
|