View Single Post
Old December 4th, 2017, 01:28 AM   #4
Bluberryrain
ninjette.org member
 
Bluberryrain's Avatar
 
Name: Nick
Location: USA
Join Date: Apr 2016

Motorcycle(s): 2009 Ninja 250r

Posts: 109
This happened to me a while back:

https://www.ninjette.org/forums/showthread.php?t=300192

It ended up being a loose electrical connection (plug) under the gas tank, on the right side of the bike.

From @Flying:

Quote:
Test the relay by short circuiting the terminals under the fuse with the screwdriver, make sure to not touch the frame.

If the starter turns over, then you need to inspect all the wiring originating from the 4-pin plug (red cover).

https://www.ninjette.org/forums/show...3&postcount=26
Wiring diagram, see the fuse/motor/battery group at the bottom right, follow it upwards to the other starter relay. Look for burnt wiring or plugs.


If the starter does not turn over, there is a problem with the relay itself, the motor, the negative/positive wiring leading to the two terminals on the relay, or the battery.
I suggest you follow his steps above with the diagram. He helped me solve the issue in minutes, when I had already spent hours.
Bluberryrain is offline   Reply With Quote


1 out of 1 members found this post helpful.