Fixed the bike over a week ago, it was alot of work but it was done. Head cylinder was warped, head gasket looked good. Resurfaced the head and put in a new head gasket to fix the problem. Before coolant was leaking at the head and the water pump through to the oil-case. The water pump was also replaced and that fixed that problem.
Ran into a problem of overheating after when got it running and it was the thermostat stuck in a closed position not letting coolant flow through the system. That thermostat was cleaned of rust and that seemed to solve the problem.
Bike is running great now and hope what I went through may help others. Thanks guys!
|