ninjette.org - View Single Post - DIY - Replace the '08+ CDI (Ignitor) with the '88-94 CDI

g21-30 · October 29th, 2009, 04:32 PM

Leave about 8" of wire sticking out of the two (2) "old" connectors; otherwise, you will run out of room to store the wires. You can use the seat size (pic below) to guess the size of the harness.

October 29th, 2009, 04:32 PM	#105
g21-30 ninjette.org certified postwhore Name: Sam Location: Northern Virginia Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.	Leave about 8" of wire sticking out of the two (2) "old" connectors; otherwise, you will run out of room to store the wires. You can use the seat size (pic below) to guess the size of the harness.