February 28th, 2015, 10:04 PM
|
#84
|
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014
Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"
Posts: A lot.
MOTM - Jun '17, May '16, Mar '15
|
Quote:
Originally Posted by choneofakind
Lol, I'm basically following the steps that a few members have done for the newgens.
1) make mounting plate out of thick ABS plastic to mount projector and aiming hardware
2) make pretty plate that covers the ugliness of the mounting plate. Paint/polish to taste
3) sand the shroud so that you can clip it to the projector like normal and sandwhich the pretty plate in there securely. Paint/polish to taste.
Only difference is unlike the newgen, I have to make my own lens too. I'll go through some basic instructions for it. haha.
|
So with that said, you are so making me one. Thxs Brah
You not far enough away, I see a road trip in my future
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|
|
1 out of 1 members found this post helpful.
|