View Single Post
Old February 3rd, 2018, 04:06 PM   #32
GreasedLissik
ninjette.org member
 
Name: silentlyloud
Location: South Bay LA
Join Date: Jan 2018

Motorcycle(s): 2007 Ninja eX250

Posts: 49
Quote:
Originally Posted by Ghostt View Post
Yes lapping is in my book mandatory!!!!, and I reuse the cylinder/head gasket all the time, but I also lap them every time!!!!

I've said this before in other posts, only to be ignored, and then read about how the head gasket leaked, etc... And they wonder why???

Lapping is easy enough to do, and doesn't cost a lot, the only cost it your time, and having it not leak.

As my write-up states is was done for the 500, which has a design flaw due to the cam chain runs between the two cylinders, but the lapping principal is the same, as is the head gasket, etc....
Then I will just do it, is the crank case need to be lapped as well? I will go through your posts on your page. I have seen a long time ago that someone used thousand grit on a glass table but I Maghreb just use a wood table
GreasedLissik is offline   Reply With Quote