View Single Post
Old April 20th, 2017, 01:11 PM   #33
NinjaBraap
NinjaBraap
 
NinjaBraap's Avatar
 
Name: Tom
Location: Long Beach, California
Join Date: Dec 2016

Motorcycle(s): 06 Ninja 636, 2016 Yamaha R3 (Street/Track), 2019 Ninja 400 Project Racebike

Posts: 175
Blog Entries: 2
UPDATE: Not finished but close!

UPDATE:

Racebike isn't finished, but it's close. New racer school starts the 28th of this month, but got to test it at our season opener trackday. It was a GoKart track so flat and really small, but the bike performed great, definitely a good HP increase now that it all tuned. Learned some things and got to analyze what needs improvement, as well as see where I'm at against a few other new and current racers in my class. Seem to be about average, which is good. My goal is just to finish and qualify for my license. Not finishing last place would be up and beyond! Any way, here's a break down of what's been done and to be done, as well as a few plans for the future (when I can afford it). Also a few pics at the end of it's current state and from the trackday.

Any and all commentary and constructive criticism is appreciated! I'll post another update when it's done, as well as after my first race weekend.


What's Been Done
New OEM front and rear sprocket
New RK 520 Chain
New Front and Rear Sprockets
New front and rear aftermarket rotors
New front and rear EBC sintered brake pads
Coolant flushed and replaced with Engine Ice
Oil flushed and replaced with Castrol Racing 4T Full Synthetic
New K&N Oil Filter
Brake fluid flushed and replaced
Carburetors cleaned and rebuilt
Re-jetted with new OEM equivalent 38 slow jets
Re-jetted with new OEM equivalent 110 main jets
Tuned for new jetting and air intake
Needles Shimmed
Air box delete, replaced with Highflow Air Pods
Replaced stock handlebars with clip-ons and 1-inch front lowering
Bar ends installed
Mirrors Removed, block off plates installed
Rear suspension adjusted
Frame Sliders and Swingarm Sliders
Passenger pegs removed, exhaust bracket installed
Pirelli Diablo Rosso II's mounted, 110 Front 140 Rear
Second set of wheel with new rotors, Rains mounted
Second set of cables (Clutch, Throttle, Choke) on hand
Second set of clip-ons on hand
Second set of Diablo Rosso II's on hand
All bearings cleaned and regreased
Entire bike degreased and cleaned

Street mods for offtrack:
Integrated tail light
Modified fender for cleaner look
Bar end mirror
Rear axle license plate mount

What's yet to be done:
Race fairings and belly pan installed
Cluster delete to tach
Brake lever guard installed
GSXR rear shock installed
MyLaps X2 Transponder installed
Safety wire


For the future:
Forks re-sprung to weight (first on list as soon as I can afford it)
Cartridge emulators
Full exhaust (TBD)
Quick shifter
515 chain and sprocket conversion
Pirelli Diablo Supercorsa's
Racing fuel cap
Racing windscreen
Rear hugger fender
Aftermarket racing rearsets
Better quality brake pads
Keyless start
Racing kill switch moding
Removal of street light controls (possibility)
Dyno and re-tune
Any weight reduction I can find (duh)


Here's a few pics too!





__________________________________________________
Racer, Mechanic, Enthusiast. Vendor for Norton Motorsports
Subscribe to my Instagram and YouTube: Instagram
YouTube
NinjaBraap is offline   Reply With Quote