View Single Post
Old August 24th, 2021, 11:50 PM   #2
Bob KellyIII
Retired motorcycle Mc.
 
Bob KellyIII's Avatar
 
Name: Robert
Location: Weed, California.
Join Date: Jul 2021

Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L.

Posts: A lot.
I got the manual for the 2012 kawasaki Ninja 250R on line and down loaded it
and it has hose connection details in it....
if you have just one hose wrong that could be causing the bike not to start.
the vacuum lines from the carb are the ones I would suspect first... those are the ones that go directly into the intake manifold , where you check for carburetor synchronization at... if their unplugged, the bike won't run.
or of their plugged into the wrong place....
the hoses have to be right.... you can't fake it and luck out !
get a manual and double check every line on that thing....
once your satisfied all is correct then you can start trouble shooting as to why it won't start.
Sorry I can't be more helpful than that but certain things MUST be right on these things, and the hoses that go everywhere are one of them.
.....
Bob......
__________________________________________________
Its too late when you've gone too far !
Bob KellyIII is offline   Reply With Quote