ninjette.org - View Single Post - DIY - Replace the '08+ CDI (Ignitor) with the '88-94 CDI

Racer x · October 31st, 2009, 05:48 AM

The 2008 ninja 250 connector plugs straight into the BRT-TIS unit . I don't think it would be a problem to reverse wire it to the 88-94 or the 95 to 07 bikes . The only one that wont work is the 86-87 because they have a dual pick up .
oops
THe wiring pattern on the 95-07 is different but the system is the same.I think the wire colors are the same .The only reason I used the 88-94 box was the 15000 rpm limiter.

October 31st, 2009, 05:48 AM	#125
Racer x ninjette.org certified postwhore Name: Eric Location: Iowa City Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot. Blog Entries: 54 MOTM - Sep '18, Feb '16	The 2008 ninja 250 connector plugs straight into the BRT-TIS unit . I don't think it would be a problem to reverse wire it to the 88-94 or the 95 to 07 bikes . The only one that wont work is the 86-87 because they have a dual pick up . oops THe wiring pattern on the 95-07 is different but the system is the same.I think the wire colors are the same .The only reason I used the 88-94 box was the 15000 rpm limiter. Last futzed with by Racer x; October 31st, 2009 at 03:01 PM.