ninjette.org - View Single Post

HoneyBadgerRy · February 29th, 2016, 08:23 AM

Edit, didn't notice this was newgen, Is there a pregen section?

YEAR: 2005

INTAKE MODIFICATIONS: K&N pod filter, DIY Ported cylinder head, Drilled carb slides, removed needle washers (extra weight)

EXHAUST MODIFICATIONS: PO Drilled out the holes around the main exit to 1/4", Ported Cylinder head (waiting to find a muzzy or area P)

JET KIT OR STOCK? Jet kit

BRAND OF JET KIT? Dynojet

MAIN JET: DJ 114

NEEDLE AND CLIP POSITION: DJ Needles 3rd Clip Position

PILOT: Keihn 40

MIXTURE SCREW SETTINGS: 3 turns out

ELEVATION: 800 ft

MISCELLANEOUS INFORMATION ABOUT YOUR BIKE’S JETTING SETUP: I doubt anybody it going to want to copy this setup, (ported head and all). Currently awaiting a dyno tune.

February 29th, 2016, 08:23 AM	#130
HoneyBadgerRy ninjette.org certified postwhore Name: Ryan Location: Beaufort SC Join Date: Aug 2015 Motorcycle(s): 05 Ninja 250, 04 KTM 625 SMC, 01 Xc250 Posts: A lot. Blog Entries: 3	Edit, didn't notice this was newgen, Is there a pregen section? YEAR: 2005 INTAKE MODIFICATIONS: K&N pod filter, DIY Ported cylinder head, Drilled carb slides, removed needle washers (extra weight) EXHAUST MODIFICATIONS: PO Drilled out the holes around the main exit to 1/4", Ported Cylinder head (waiting to find a muzzy or area P) JET KIT OR STOCK? Jet kit BRAND OF JET KIT? Dynojet MAIN JET: DJ 114 NEEDLE AND CLIP POSITION: DJ Needles 3rd Clip Position PILOT: Keihn 40 MIXTURE SCREW SETTINGS: 3 turns out ELEVATION: 800 ft MISCELLANEOUS INFORMATION ABOUT YOUR BIKE’S JETTING SETUP: I doubt anybody it going to want to copy this setup, (ported head and all). Currently awaiting a dyno tune. __________________________________________________ Because Unregistered sucks at riding.