View Single Post
Old August 6th, 2018, 09:56 AM   #41
gantt
ninjette.org sage
 
gantt's Avatar
 
Name: michael
Location: Central Georgia
Join Date: May 2013

Motorcycle(s): 2019 Ninja 400, Sold 2012 Ninja 650, Sold 2009 Ninja 250r, Sold 2007 DRZ400s

Posts: 628
Quote:
Originally Posted by DannoXYZ View Post
Hi, for full Area P exhaust with stock airbox with snorkel delete, should start with following settings using DynoJet kit:

- 38 stock pilots, 2.5-turns out
- 98 DynoJet mains (slightly smaller than factory 98)
- middle clip position on needle

This should get you about +20% more airflow and +20% more power than stock. Will still be too rich in high-end, not as bad as stock though. Fiddle with pilot screws for idle & throttle-opening transition. Adjust needle clip +/- 1 as needed for mid-range/partial-throttle.
thanks!!
gantt is offline   Reply With Quote