ninjette.org - View Single Post

DannoXYZ · December 2nd, 2018, 04:39 PM

Not sure what you mean by rear-hub vs. rear-wheel....

Hub is centre section that axle goes through. Contains bearings.

Wheel.... is typically hub + rim. On these Ninjas, hub + rim is one-piece combo.

So 250R hub is part of 250R wheel and cannot be separated.
And a 300 hub is part of 300 wheel and cannot be separated.
It's not possible to use 250R hub with 300 rim, or vice-versa, unless you cut off rim and weld it onto spokes of other wheel.

December 2nd, 2018, 04:39 PM	#3
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Not sure what you mean by rear-hub vs. rear-wheel.... Hub is centre section that axle goes through. Contains bearings. Wheel.... is typically hub + rim. On these Ninjas, hub + rim is one-piece combo. So 250R hub is part of 250R wheel and cannot be separated. And a 300 hub is part of 300 wheel and cannot be separated. It's not possible to use 250R hub with 300 rim, or vice-versa, unless you cut off rim and weld it onto spokes of other wheel.