March 10th, 2013, 05:04 PM
|
#102
|
|
ninjette.org newbie
Name: marc
Location: tondo manila
Join Date: Feb 2012
Motorcycle(s): ninjet 250r
Posts: 6
|
Quote:
Originally Posted by tom2knox
Hi everyone, I'm having problem with mine, after pulling the throttle, the RPM slowly goes down, is this something to do with the mixture? After installation of the kit, the mechanic sync the carbs, but I don't know if he played with the mixture screw. The mechanic did not removed the snorkel too. Please help me, the bike is stock on the garage because of the RPM slowly pulls down whenever you rev the throttle. Thanks in advance.
By the way I used the 98 sportisi main jet and the 38 stock pilot jet, I did do the second from top clip needle then washer then clip then washer thing in the needle.
|
Problem solved, I adjusted the A/F mixture to 2 3/4, runs perfect as of now ^_^
|
|
|