Quote:
Originally Posted by FrugalNinja250
The drain tube is always open, connected to a tube that routes drainage down below everything. My drain tube hangs down about 3" below the bottom of the bike. If the evap system is missing then you can run a drain hose from the tube that connects to the filler cap vent, identify which is which by pouring a little liquid down the tube end located in the filler cap area, it's the one with a gasket to mate with a nipple on the filler cap itself. The other one you can cap.
|
just plug the evap and return lines and get rid of the charcoal filter and vacuum sump. you don't need a routed drain line if you dont spill anything up there. if you are going to spill, have a drain routed so you dont drip gas on your frame and engine.