ninjette.org - View Single Post

jkv45 · July 24th, 2021, 08:15 PM

Most likely you will need to add a resistor to the ignition in order for it to start.

It will crank, but not start if it's not in place. Almost all the aftermarket ignition switches don't have it for some reason.

I've not personally done it, but there are threads here with more info. I think DannoXYZ has posted some specifics about it.

July 24th, 2021, 08:15 PM	#2
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	Most likely you will need to add a resistor to the ignition in order for it to start. It will crank, but not start if it's not in place. Almost all the aftermarket ignition switches don't have it for some reason. I've not personally done it, but there are threads here with more info. I think DannoXYZ has posted some specifics about it.