View Single Post
Old February 13th, 2020, 04:19 PM   #5
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Found set for '08-12 new-gen. Not sure if they'll work on earlier models.
https://www.aliexpress.com/item/4000670035379.html

EDIT: This will work on pre-gen 250s to raise bars. But you have to shim ID to fit smaller 36mm forks. And drill 2 new holes to fit narrower spacing on pre-gen bars.

Last futzed with by DannoXYZ; February 14th, 2020 at 04:57 PM.
DannoXYZ is offline   Reply With Quote