ninjette.org - View Single Post - DIY

camaroz1985 · March 18th, 2009, 07:27 AM

I will add a list of parts tonight, but to answer your question Todd, Yes, you can get this relay at any auto parts store. Look with the driving lights and that sort of thing or with all the fuses.

And to answer your question Sam, there is not a ground wire on the fuse block. Apparently they have changed this from the older ones so now you will have to ground each accessory circuit individually. I will run mine to the frame.

I am only going to be using 2 circuits, but if you were using them all you might want to think about using a grounding bar to get all your circuits attached easier.

March 18th, 2009, 07:27 AM	#6
camaroz1985 ninjette.org certified postwhore Name: Ryan Location: Carlisle, PA Join Date: Nov 2008 Motorcycle(s): 2008 WR250R, 2006 Ural Raven (Sold), 2009 Versys Green (Sold), 2008 Ninja 250R Green (Sold) Posts: A lot.	I will add a list of parts tonight, but to answer your question Todd, Yes, you can get this relay at any auto parts store. Look with the driving lights and that sort of thing or with all the fuses. And to answer your question Sam, there is not a ground wire on the fuse block. Apparently they have changed this from the older ones so now you will have to ground each accessory circuit individually. I will run mine to the frame. I am only going to be using 2 circuits, but if you were using them all you might want to think about using a grounding bar to get all your circuits attached easier.