ninjette.org - View Single Post

tfkrocks · October 25th, 2013, 10:13 PM

You could try rebuilding the section with ABS cement. Put some clay on the outside to cover the hole, sand down the inside a bit, and then layer on ABS cement until it's about as thick at the fairing. You can sand/repaint the outside after if you want.

October 25th, 2013, 10:13 PM	#2
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	You could try rebuilding the section with ABS cement. Put some clay on the outside to cover the hole, sand down the inside a bit, and then layer on ABS cement until it's about as thick at the fairing. You can sand/repaint the outside after if you want. Last futzed with by tfkrocks; October 26th, 2013 at 12:01 PM.