Thread: Valve shims
View Single Post
Old January 19th, 2022, 10:06 PM   #10
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
It comes down to flow numbers. Here's what I measured with 3/16" filter I got from motocross shoppe:

- 80% WOT on track consumes 7 ltr/hr
- that works out to approximately 120cc/min
- measured flow-rate at 6" below tank = 210cc/min

Unless you can find somewhere to ride at 140% WOT for hours on end; flow is more than sufficient.
DannoXYZ is offline   Reply With Quote


1 out of 1 members found this post helpful.