ninjette.org - View Single Post

DannoXYZ · October 19th, 2021, 09:09 AM

Yup, even though there's 4 spring posts and 4 possible ways to install spring/pressure plate, only TWO of orientations will work. Look carefully and you'll see that teeth next to some posts are raised and some are lowered. You can't just put in pressure-plate any which way. Have to line up dimple marks. Otherwise springs won't be able to push inwards on pressure-plate and compress stack.

https://www.ninjette.org/forums/show...876#post915876

October 19th, 2021, 09:09 AM	#18
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Yup, even though there's 4 spring posts and 4 possible ways to install spring/pressure plate, only TWO of orientations will work. Look carefully and you'll see that teeth next to some posts are raised and some are lowered. You can't just put in pressure-plate any which way. Have to line up dimple marks. Otherwise springs won't be able to push inwards on pressure-plate and compress stack. https://www.ninjette.org/forums/show...876#post915876 Last futzed with by DannoXYZ; October 19th, 2021 at 10:27 AM.
	1 out of 1 members found this post helpful.