Quote:
Originally Posted by Bob KellyIII
if you can move a clutch plate with your finger it's not assembled right !
.....
my 2 coppers !
Bob........
|
Oh yeah, test your work! After taking off side cover, you can reach in between fingers and jiggle the plates! That's because with pressure-plate not lined up with dimples, it gets hung up on raised teeth on outside of basket. Never compresses stack. Thus freewheeling in 1st gear! Good idea, see if you can wiggle clutch plates before putting cover back on!
BTW - I've run el-cheapo fleaBay clutch pack on my race-bike with 22% more power than stock for past 4-yrs without any problems! Spears gave me some stiffer springs, not sure if they were EBC or Barnett