View Single Post
Old August 11th, 2017, 06:42 PM   #26
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Quote:
Originally Posted by gitter View Post
Used 'noid light, worked fine on right cylinder, left cylinder nothing lit up.

Unplugged gauge cluster from harness, still no spark on left cylinder
Quote:
Originally Posted by gitter View Post
Just pulled the gauge cluster harness apart didn't see any damaged wires. Time to start pulling the main harness apart?
Odd... testing showed there's no short on black wire between ECU/igniter and gauge-connector though.

Where did you hook up 'noid-light? At the coils? Or at the ECU connector? If at ECU connector, then we have bad ECU with no output on one side

Last futzed with by DannoXYZ; August 11th, 2017 at 08:38 PM.
DannoXYZ is offline   Reply With Quote