Quote:
Originally Posted by ducatiman
if you've plugged the vent hose, obviously remove the plug and allow the hose to breathe
"only runs with the choke full on"
this indicates clogged jets and/or passages
|
thanks for the help with the hose, I didn’t have it plugged when it would only run with the choke on, I reset the mixture screws to 2.5 turns, cleaned every jet meticulously with a piece of bristle and put everything back on it. It runs now with the choke slightly engaged after warming up. I increased the idle from the adjustment Bc it was really low and it seemed to help a little bit.
The next question I have is should i increase the air fuel mixture to be able to run with the choke completely off. The screws are currently at 2.5 turns out from all the way in. Or is it something I should do to help, or is the bike supposed to run with choke slightly engaged?