ninjette.org - View Single Post

DannoXYZ · January 21st, 2021, 11:03 AM

maybe look for tank with pump built-in? Or retrofit your tank with in-tank pump. Can cut iut and braze in section from 300 tank perhaps? Or use small inline pump, like small Walbro. Swirl pot not really necessary on street bike.

Sure, small airbox will work. Just need to be sealed from outside. IAT-sensor goes in after filter.

January 21st, 2021, 11:03 AM	#20
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	maybe look for tank with pump built-in? Or retrofit your tank with in-tank pump. Can cut iut and braze in section from 300 tank perhaps? Or use small inline pump, like small Walbro. Swirl pot not really necessary on street bike. Sure, small airbox will work. Just need to be sealed from outside. IAT-sensor goes in after filter.