MV Agusta Motorcycle Factory Tour Part 3 (dyno testing, final checks, special projects and shipping) Roadracing World’s Sam Fleming and Melissa Berkoff visited the MV Agusta factory in Varese Italy […]
The post
Video: MV Agusta Factory Tour, Part Three appeared first on
Roadracing World Magazine | Motorcycle Riding, Racing & Tech News.
MV Agusta Motorcycle Factory Tour Part 3
(dyno testing, final checks, special projects and shipping)
Roadracing World’s Sam Fleming and Melissa Berkoff visited the MV Agusta factory in Varese Italy in April 2022.
It is very rare to be able to video inside a modern motorcycle factory so you can join Sam and Melissa in a detailed walk through the factory to see the final steps of ensuring performance and quality of the MV Agusta motorcycles.
This is part three of a three-part series.
Most of these videos are unscripted and had to be shot contemporaneously with the tour so forgive any verbal slips or the handheld nature of the camera work.
Part 3
00:05 Dyno testing finished motorcycle
03:09 Final Assembly
04:41 Bella ragazza
06:30 Special projects area
08:24 Final inspection with lots of lights
12:16 Delivering the babies
14:02 A farewell
We hope you find this look inside the factory as fascinating as we did. Please let us know in the comments!
If you missed them, Part 1 of this feature is here:
https://www.youtube.com/watch?v=4BOj-…
Part 2 of this feature is here:
https://www.youtube.com/watch?v=kwN0b…
Subscribe to the print magazine at
http://roadracingworld.com
See an archive of other Army Of Darkness articles at
http://armyofdarkness.com
@roadracingworld @mvagusta @vansonleathers
The post
Video: MV Agusta Factory Tour, Part Three appeared first on
Roadracing World Magazine | Motorcycle Riding, Racing & Tech News.