ninjette.org - View Single Post - IGNITION SWITCH BYPASS-To-3pSt

Edge Genesis · February 26th, 2021, 04:59 PM

Apologies for the lengthy thread. I have a couple of parts bikes ninja 250s. None of witch have the ignition. I do have the end of the pigtail that plugs into the ignition. The ignition has been removed. Trying to attach this 3pst switch to it in order to power the bikes. I believe that’s the only way to get them running. I have fuel, and the engines will turn over. But without a type of ignition switch I don’t think they will turn on. I have a printed out paper of the wiring. I have the 100 ohm resistor. I’ve connected Wht/Br to one set of terminals, Rd/Rd Bl to one, and Wht Bk/Wht Gr/and Gy to the other. I have the courses on the on side and the loads on the off side. I have the resister in between the Grey wire. I have continuity between all wires, except for the grey. I assume because of the resistor. I don’t know whether I just don’t have the wires hooked up correctly or perhaps I should just connect the grey directly to the terminal from the grey? Thanks in advance, all!

February 26th, 2021, 04:59 PM	#1
Edge Genesis ninjette.org member Name: Dalton Location: Meadoview Join Date: Feb 2021 Motorcycle(s): Ninja 250 Posts: 34	IGNITION SWITCH BYPASS-To-3pSt Apologies for the lengthy thread. I have a couple of parts bikes ninja 250s. None of witch have the ignition. I do have the end of the pigtail that plugs into the ignition. The ignition has been removed. Trying to attach this 3pst switch to it in order to power the bikes. I believe that’s the only way to get them running. I have fuel, and the engines will turn over. But without a type of ignition switch I don’t think they will turn on. I have a printed out paper of the wiring. I have the 100 ohm resistor. I’ve connected Wht/Br to one set of terminals, Rd/Rd Bl to one, and Wht Bk/Wht Gr/and Gy to the other. I have the courses on the on side and the loads on the off side. I have the resister in between the Grey wire. I have continuity between all wires, except for the grey. I assume because of the resistor. I don’t know whether I just don’t have the wires hooked up correctly or perhaps I should just connect the grey directly to the terminal from the grey? Thanks in advance, all!