ninjette.org - View Single Post - Newgen motor in a Pregen Frame

choneofakind · January 8th, 2019, 05:41 PM

@GreasedLissik, for the radiator, I used the pregen radiator with my newgen engine because it made the mounting much easier with the body panels. Additionally, the area of each radiator wasn't terribly different.

I'm not sure about the 300 engine's physical shape, but if I was in your shoes and the area of the 300 radiator isn't horribly different from the area of the 250 radiator, I'd consider using the pregen 250 radiator. I only had to make a couple small brackets for the right side and it was quick.

FYI: I no longer have a motorcycle in the fleet, so I'm working all of memory here.

January 8th, 2019, 05:41 PM	#82
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	@GreasedLissik, for the radiator, I used the pregen radiator with my newgen engine because it made the mounting much easier with the body panels. Additionally, the area of each radiator wasn't terribly different. I'm not sure about the 300 engine's physical shape, but if I was in your shoes and the area of the 300 radiator isn't horribly different from the area of the 250 radiator, I'd consider using the pregen 250 radiator. I only had to make a couple small brackets for the right side and it was quick. FYI: I no longer have a motorcycle in the fleet, so I'm working all of memory here.