ninjette.org - View Single Post

gitter · December 5th, 2020, 12:21 PM

Thanks! So for when the pods show up, do I sync them before I start tuning? I'm assuming yes. In their current state, 108 mains, idle screws 2.5 turns out, stock pilots, and no shims on the needles. I just ballparked stuff for now off of other 250's I've done as I dont currently have the filter (waiting on shipping)

Also, do I need to have pods attached to the carbs to get an accurate sync? I always assumed yes, but never actually asked the question.

December 5th, 2020, 12:21 PM	#22
gitter ninjette.org member Name: Joel Location: Napa, CA Join Date: Jan 2013 Motorcycle(s): 20' Speed Triple RS - 95 ex250 Posts: 109	Thanks! So for when the pods show up, do I sync them before I start tuning? I'm assuming yes. In their current state, 108 mains, idle screws 2.5 turns out, stock pilots, and no shims on the needles. I just ballparked stuff for now off of other 250's I've done as I dont currently have the filter (waiting on shipping) Also, do I need to have pods attached to the carbs to get an accurate sync? I always assumed yes, but never actually asked the question.