ninjette.org - View Single Post

DannoXYZ · June 7th, 2022, 04:52 PM

Yeah, the roller bearings will last forever.

Bearing-preload is adjusted by the ring/collars, not the big nut on top. Yes, should be not too tight and not too loose. When you lock rings, adjustment is set and locked. Adding top triple-T and bolt shouldn't affect adjustment.

June 7th, 2022, 04:52 PM	#25
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Yeah, the roller bearings will last forever. Bearing-preload is adjusted by the ring/collars, not the big nut on top. Yes, should be not too tight and not too loose. When you lock rings, adjustment is set and locked. Adding top triple-T and bolt shouldn't affect adjustment. Last futzed with by DannoXYZ; June 8th, 2022 at 06:41 AM.