ninjette.org - View Single Post

DirtyPelican · July 3rd, 2017, 10:29 AM

I took some vinegar to the tank for about 10 hours, followed by a baking soda rinse to neutralize and then ran a bottle of rubbing alcohol thru it to dry up some water. Left it over night open to dry up and the tank seems almost brand new.

I took the carbs apart and soaked all the small bits in Pine-sol for about 2 days. Took a brush to them, passed a small wire thru all the small holes, and blew air thru them. The carbs themselves are still soaking.

All cleaned up

July 3rd, 2017, 10:29 AM	#8
DirtyPelican ninjette.org member Name: Tiago Location: North NJ Join Date: Jun 2017 Motorcycle(s): Ninja 250, Triumph Speed Triple Posts: 108	I took some vinegar to the tank for about 10 hours, followed by a baking soda rinse to neutralize and then ran a bottle of rubbing alcohol thru it to dry up some water. Left it over night open to dry up and the tank seems almost brand new. I took the carbs apart and soaked all the small bits in Pine-sol for about 2 days. Took a brush to them, passed a small wire thru all the small holes, and blew air thru them. The carbs themselves are still soaking. All cleaned up