ninjette.org - View Single Post - DIY- Woodcraft Clipon Install

MaLeK · July 4th, 2009, 08:05 AM

I don't know if this was mentioned before..I guess I should've wrote it in my last post but here's just a quick little tip to taking the grips off. took me about 30 seconds to get both off..and it doesnt scratch the original bars like the screwdriver method.

If you have an air compressor, use this kind of head (picture) and slide the tip under the grips, shoot some air and they slide off. The tip is the needle that blow up basketballs, footballs..etc.

July 4th, 2009, 08:05 AM	#190
MaLeK umm..YES! Name: Malek Location: Bellbrook, Ohio Join Date: Jun 2009 Motorcycle(s): 08 250R Posts: 10	I don't know if this was mentioned before..I guess I should've wrote it in my last post but here's just a quick little tip to taking the grips off. took me about 30 seconds to get both off..and it doesnt scratch the original bars like the screwdriver method. If you have an air compressor, use this kind of head (picture) and slide the tip under the grips, shoot some air and they slide off. The tip is the needle that blow up basketballs, footballs..etc. __________________________________________________ Installed-Blue Seat Cowl, Pro-Grip tank pad, Blue LED's, Woodcraft Clipons, Comp Werkes Fender Eliminator. Upcoming-Sportisi Rearsets, Blue rim-stripes, Jet Kit, Slip On.