View Single Post
Old July 5th, 2018, 11:04 AM   #29
Zww1019
ninjette.org member
 
Name: Zak
Location: Ft. Lauderdale
Join Date: Jun 2018

Motorcycle(s): Ninja 250r

Posts: 18
Quote:
Originally Posted by DannoXYZ View Post
Bring your wonky fuse into Autozone and measure it with their 3306N. Sometimes auto-ranging doesn't work very well. The clutch switch is also concern, should be 0.0 or 0.L, nothing in between.
Alright, thanks. I’ll do that. I was intimidated by the fact that the 3306N is not auto ranging.

So when I have the multimeter points on the two outside prongs of the clutch switch 47D29B91-5C66-48BF-9631-1258D4DE1FAE.jpeg, then press the clutch button in, It shouldn’t show a number? Like I mentioned, when I did this It showed 8.0. Then I released the clutch button and it went back to 0, pressed again It went to 7, and then 5.7 the last time (slowing fluctuating around those values).
Zww1019 is offline   Reply With Quote