can't get spark on a 2004 ninja 250
I'm aware of all the necessary wiring and have the 100 ohm resistor wired in from the brown to grey wire, but am not getting spark still.
I've used a spark tester to verify power thru the coils and back to the box on the trip wire and can make it spark manually so i know the coils and power from the kill switch is ok. getting an ac pulse from the trigger at the box on the yellow and the black/white stripe wires. 12V DC on both trips and the brown/black stripe power wire. able to read 12V thru the black/yel and green/black ground wires. getting about 10V on the grey don't hot wire me wire, which i think is the culprit, but i'm not sure how much voltage is expected on this grey wire.
made a video in case what i've written above isn't making sense -
http://youtu.be/RByFOFZtjtc
need to get this baby going, all help is appreciated
thanks for looking