ninjette.org - View Single Post

maverick9611 · May 27th, 2018, 12:16 AM

if you have 40's in you cannot be lean on the bottom end. start out with shimming needles with 2 washers. you will be amazed at the change. buy a good pilot adjusting tool to help you set the pilots. I use a motion pro. works everytime

here is some info by ghostt on bench syncing and adjusting pilots (with 40's start with 2 turns out)
https://www.ninjette.org/forums/showthread.php?t=223984
look for Conan pic on pilots. go ahead take that snork out, its a 10 min. job!

May 27th, 2018, 12:16 AM	#4
maverick9611 "a legend in my own mind" Name: maverick9611 Location: Augusta,Georgia Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot. MOTM - Feb '18	if you have 40's in you cannot be lean on the bottom end. start out with shimming needles with 2 washers. you will be amazed at the change. buy a good pilot adjusting tool to help you set the pilots. I use a motion pro. works everytime here is some info by ghostt on bench syncing and adjusting pilots (with 40's start with 2 turns out) https://www.ninjette.org/forums/showthread.php?t=223984 look for Conan pic on pilots. go ahead take that snork out, its a 10 min. job! __________________________________________________ "trying not to get old" Last futzed with by maverick9611; May 27th, 2018 at 02:19 AM.