ninjette.org - View Single Post

DannoXYZ · December 1st, 2019, 05:17 PM

Yes, you can pop out gauges and put into custom housing. Easiest to make face first to hold all gauges in orientation you want. Simplest to do with carbon-fibre panel. Once that’s done, you can figure out sides and back. This is practically no-cost option, $10-15 in supplies.

Next up is Koso clones from Ali, $25-35.

All these require wiring. So if you don’t know how to use multimeter and know how to solder, allocate budget accordingly to hire someone who does.

December 1st, 2019, 05:17 PM	#3
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Yes, you can pop out gauges and put into custom housing. Easiest to make face first to hold all gauges in orientation you want. Simplest to do with carbon-fibre panel. Once that’s done, you can figure out sides and back. This is practically no-cost option, $10-15 in supplies. Next up is Koso clones from Ali, $25-35. All these require wiring. So if you don’t know how to use multimeter and know how to solder, allocate budget accordingly to hire someone who does.