Quote:
Originally Posted by Jeepster1000
does it seem like the resistor is in proper place?
|
To me it looks like you have the wrong 100-ohm resistor when it should match the original is must likely a 100 ohm 1/4 Watts Carbon Film Resistors 1% Tolerance that is 5 color code (brown, black, black, black, brown) your look like its (brown, black, black, gold, red) ?.
Used the 2kΩ or 20kΩ setting it should range of about 1.01k or not below 0.97 from resistor it self