Wheels I went naked on mine, took a sandblaster to them. Purple wasn't gonna cut it.
Tires I've used Kenda K671, and Bridgestone BT45. Both excellent choices the Kendas are inexpensive, excellent wet weather performance, and last a lot of miles perfect for commuting.
Good luck on your second attempt, I'm lucky enough to have the free time needed to do mine, so it only took about month to do the bulk of the work. It's maiden long distance voyage was soon after, 700 miles in a single day.
Work performed so far,
Cut and set sag front fork springs(springs from a Ninja 500 1st generation, rate is .85kg/mm )
Replace fork oil 15wt synthetic
Install new fork seals and dust caps
Replace rear shock(zx600c)
Replace shock oil 15wt synthetic
Change gears +1/-2(15/43)
Rebuild/tune carbs, adjust idle mixture
K&N air filter
New brake pads F&R EBC extreme HH
New Wave front rotor
Used OEM rear rotor
Rebuilt calipers
Modified OEM seat(gel/foam insert, Custom Seat Creation cover solo line cf silver/cf metal, heated kit)
Extra heavy bar ends(3"/23oz)
Heated grips w/ foam covers
Touring windscreen / 7 JuRock 18" 73%tint w/ flip
Shorter bar risers(OEM ZX600c, lower bars about 1 1/2")
Removed paint from rims, bare aluminum
Bridgestone BT-45s w/ Dynabeads
Stainless steel allen head fasteners
Stainless steel braided brake lines
Shorty adjustable levers
HD clutch springs
Charge/voltage LED indicator
LED clock
HID headlight(55w 5k)
Replaced all other bulbs with CREE LEDs
DIY integrated tail light kit w/clear lens
DIY rear fender elimination
DIY licence plate mount(LEDs to illuminate the plate/red LEDs tied into brake light)
Brake light modulator
Maintenance free gel battery
Compact air horn
2007 Complete OEM fairing set silver
Genuine imitation carbon fiber wrap misc parts
Reflective custom graphics ZX-2R silver
Reflective custom graphic NINJA red(taillight lens)
Reflective rim tape silver
Electronic turn indicator relay
Replace front side reflectors with flush mount turn indicators LEDs
Installed rearview camera system
Installed oil cooler
Strip paint off grab handle, bare aluminum alloy.*
Custom reflective graphic "SERENITY" for windscreen silver
Aluminum chain guard from Suzuki Bandit 1200
Swing arm plugs from 08 Ninja 250
Mad Hornets Turn Signal Indicators w/duel color Cree LEDs(amber/white)
FH010 R/R modification
Digital gear indicator
Universal Rear View Side Mirror Rain Board Sun Visor Shade Shield
Kawasaki ZRX1200 lowered foot pegs
OEM upgrade shift spring
All this and full maintenance and rebuild everything else except the motor. I'm sure I'm forget some stuff, but you get the idea
SIDENOTE: is that a CBR500 chain guard I see in your parts photo?
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|