|
Just a quick update: #35 pilot jets installed, #108 main jets (i Think), correct needles with no shims. Carbs cleaned. Fuel mixture screws 2.5 turns out. Seems kind of boggy and I have a hanging idle problem. I can touch the throttle and the RPM will hang at a high idle even with the idle adjuster turned down. I think that is a lean condition right? So how can i fix it? I did notice that there was a tiny o-ring missing from the air cut valve assembly. Does any one know what size it is and if I can go to my local hardware store and get a new one?
The Taiyo Giken Petcock is leaking gas in the fuel line even in the on position. I would like to replace it with a new one, but I am not sure want to get. The one I have has that special silver disc on the petcock lever and I cannot seem to find another petcock that it would fit. If someone could help me with this I would appreciate it.
Thanks
Tom
|